On June 8th, 2023, A delegation led by the director of the Kaluga Oblast Water Authority and engineers visited our company, visited our company to discuss the stainless steel rotary disc filter project. This project is a crucial part of our company’s commitment to providing high-quality water filtration solutions to our clients. During their visit, the officials were given a tour of our factory workshop and stainless steel rotary disc filter and were able to had in-depth communication and exchange on technical issues related to the equipment, and the entire discussion process was very smooth.

Introduction to Stainless Steel Rotary Disc Filter

The stainless steel rotary disc filter is mainly suitable for deep treatment in the back-end of sewage treatment processes. The stainless steel rotary disc filter is installed after the conventional secondary sewage treatment system or the secondary sedimentation tank of the conventional secondary sewage treatment, mainly removing total suspended particulate matter in the water. If combined with chemicals, it can also remove some pollutants such as phosphorus, turbidity, COD, etc. The stainless steel rotary disc filter is suitable for upgrading and upgrading the effluent discharge of existing sewage treatment plants or meeting the discharge standards of new sewage treatment plants, It can increase the discharge standard of primary B to primary A for raw water.

Benefits of Stainless Steel Rotary Disc Filter

1. Good effluent quality, stable water quality and quantity.Fiber rotary disc filter uses a filter disc wrapped with a filter cloth to replace the sand filter material of traditional filters. The filter cloth has a small pore size and can intercept small particles with a particle size of several micrometers.
2. The equipment is simple and compact, with few auxiliary equipment, and the investment in the entire filtration system is low; Low idle rate of equipment and low total installed power.Single fiber rotary filtration system equipment can continuously filter during cleaning. And when the fiber rotary disc filter performs reverse suction, the instantaneous cleaning area only accounts for 1% of the filtering area, with frequent cleaning and short duration.
3. Automation of operation makes operation and maintenance simple and convenient.The filtration process adopts automatic control, which can adjust the interval time and the entire process time of negative pressure suction cleaning and sludge discharge.
4. Low operating costs.The water consumption is much lower than that of traditional filter tanks and close to that of traditional filters.
5. The floor area is much smaller than other filters.Due to the vertical central air duct design of the filtration turntable, although it occupies a small area, it can ensure a larger filtration area, thereby reducing the volume of the pool, material consumption, and land area, significantly reducing engineering costs.
6. Short design and construction cycles.The fiber rotary disc filter is fully equipped and can be shipped as a whole, making design and construction convenient and fast; And expansion is easy. Traditional filter media filters require a lot of design work and on-site construction work, resulting in a long cycle.
7. The Stainless Steel Rotary Disc Filter has dual functions of filtration and sedimentation. Because of the sharing of filtration load by sedimentation, the filtration load is reduced, so as to improve the filtration efficiency and buffer capacity again.
8. Impact resistant, with a wide range of adaptability. The fiber rotary filter is equipped with 2 sets of automatic cleaning programs:Large fiber rotary disc filters all use two sets of reverse suction pumps. Program 1: Clean each filter disc one by one; Program 2: Clean two sets of filter discs simultaneously. The former is suitable for operation with normal water quality, while the latter is suitable for operation with poor water quality.

Tour of Our Facilities

During their visit, the officials were given a tour of our facilities, including our production line and testing facilities. They were able to see firsthand the advanced technology and expertise that goes into the production of our stainless steel rotary disc filters. Our team of engineers and technicians demonstrated the various stages of the production process, from the cutting and shaping of the stainless steel rotary disc filter to the operation status of stainless steel rotary disc filter project site. The officials were impressed with the level of precision and attention to detail that goes into the production of our filters.

Discussion of Project Requirements

Following the tour of our facilities, the officials met with our team to discuss the specific requirements of their project. Our team of engineers and technicians discussed closely with the officials to understand their needs. The officials were impressed with our team’s expertise and professionalism, and they expressed their confidence in our ability to deliver a high-quality solution.

Conclusion

The visit by the officials from the Russian Kaluga Oblast Water Company was a great success, and very satisfied with our products and prices, and signed a purchase contract of 1.5 million yuan on site.We believe that this cooperation is only the first step towards entering the Russian market, and we believe it will be even better in the future.